Step Flashing Repair
Repair or replace flashing integrated with roofing along the sides of the chimney.
Water around a chimney does not automatically mean the masonry is leaking. Step flashing, counterflashing, roof transitions and the chimney crown all need to be considered.
A few details are enough to get the conversation started.
Request an estimate →Choose the service that best matches what you need. If you’re not sure, just call or send a quick request.
Repair or replace flashing integrated with roofing along the sides of the chimney.
Restore the upper flashing detail that protects the top edge of step flashing.
Evaluate water flow behind wider chimneys where roof geometry can concentrate runoff.
Trace staining and roof conditions to determine whether flashing is the likely entry point.
Check nearby mortar joints and masonry that can mimic or contribute to a flashing leak.
Coordinate shingles or other roofing around repaired flashing for a watertight transition.
Chimneys interrupt the roof surface, creating several places where water can enter. Flashing repair should distinguish between failed metalwork, sealant-only patches, roof issues and masonry or crown problems so the correct component is repaired.
Start with the problem.
Tell us what you’re seeing and where the project is located.
Get a clear recommendation.
We help identify the right next step without overcomplicating it.
Schedule the work.
Once approved, the service provider coordinates timing directly with you.
Call or send a short estimate request.
Discuss the project, timing, and next steps.
Choose a time that works and get the service handled.
We focus on the primary market and nearby communities so inquiries stay relevant and response times stay practical.
Quick answers to the questions customers usually ask first.
Interior staining near the chimney, wet roof decking and visible gaps or corrosion around flashing are common clues, but masonry and roof leaks can look similar.
Sealant may be part of some details, but surface caulk is usually not a durable substitute for properly integrated flashing.
Proper step-flashing work often requires access beneath surrounding roofing, so some shingle removal and replacement may be necessary.
It is the upper flashing that overlaps the roof flashing and is commonly integrated into or attached to the chimney masonry.
Yes. Crown cracks, masonry absorption and caps can create leaks that appear near the same area.
Interior stain locations plus clear exterior photos of all chimney sides and the roof slope help narrow the source.
Send a quick request and we’ll get it to the right person for follow-up.